Quick Answer: Matching NIBP Hoses for Philips Monitors
-
IntelliVue MP20–90 & MX400–800 (Standard 6mm Bore): Requires M1598B (5ft) or M1599B (10ft) single-tube TPU hose (MedLinket P/N:
YA25A06-10). Uses A25 monitor connector to A06 metal quick-connect cuff connector. -
IntelliVue MMX, X3 & MX100 (ISO 80369-1 5mm Red-Ring Connector): Requires 989803209771 (10ft) hose (MedLinket P/N:
YA80A06-10). Identifiable by the red collar on the plug. Force-fitting legacy 6mm hoses causes air leaks or module socket damage. -
Efficia CM & SureSigns VM (Adult / Pediatric): Standard quick-connect air hose M1599B (MedLinket P/N:
YA25A06-10). -
Infant & Neonatal (All IntelliVue / Efficia / SureSigns): Requires M1596B / M1597B (10ft) hose with female luer-slip safe-release connector (MedLinket P/N:
YA25A30-10) or 989803209761 (YA80A45-10) for MMX/X3 models. -
Entry-Level Philips A1 & A3 Series: Uses M3918A / 989803136931 (10ft) hose (MedLinket P/N:
YA06A06-10).
Key Takeaways for BMETs & Purchasing
- Global market data shows Philips holds a 15–18% market share, dominating ICU and OR care beds. Having the correct compatible NIBP air hose prevents workflow interruptions.
- The most critical BMET trap is confusing legacy 6mm bore connectors (A25) with newer 5mm ISO 80369-1 red-ring connectors (A80) on compact X3 and MMX transport modules.
- All MedLinket Philips-compatible NIBP hoses are manufactured from medical-grade TPU, 100% factory leak-tested under 300 mmHg static pressure, and CE/FDA cleared.
At MedLinket (Shenzhen Med-Link Electronics Tech Co., Ltd; Stock Code: 833505), we specialize in delivering high-quality, OEM-compatible NIBP hoses, reusable blood pressure cuffs, disposable NIBP cuffs, and neonatal accessories. All MedLinket products meet ISO 13485:2016, FDA 510(k), and CE MDR standards to ensure 100% seamless compatibility across Philips monitor series.
Table of Contents
- 1. IntelliVue MP & MX Series (Standard 6mm Bore)
- 2. IntelliVue MMX, X3 & MX100 (ISO 80369-1 Red 5mm Connector)
- 3. Efficia CM & SureSigns VM Series
- 4. Basic Entry-Level Models: Philips A1 & A3
- 5. Master Philips NIBP Hose Cross-Reference Table
- 6. Common Misuses & Safety Quick Guide
- 7. Why Choose MedLinket for Philips Accessories
- 8. Frequently Asked Questions
1. IntelliVue MP & MX Series: Advanced Monitoring for Critical Care
The Philips IntelliVue series covers full clinical scenarios in critical care (ICU, CCU, OR). Representative models include the MX400, MX450, MX500, MX550, MX700, MX800, and MP20, MP30, MP40, MP50, MP60, MP70, MP80, MP90 series.
All classic IntelliVue monitors share a standardized NIBP female air socket on the monitor/module front panel designed for a 6mm single-tube connector (MedLinket A25 connector). To connect to a reusable or disposable cuff, the hose utilizes a metal quick-connect bayonet connector (MedLinket A06 connector) at the cuff end.
2. IntelliVue MMX, X3 & MX100: New ISO 80369-1 Standard (Red 5mm Connector)
In newer compact transport modules and patient monitors — specifically the IntelliVue MMX, IntelliVue X3, and IntelliVue MX100 — Philips redesigned the NIBP port to comply with international standard ISO 80369-1 (small-bore connectors for liquids and gases in healthcare).
The new ISO 80369-1 connector features a 5-millimeter bore diameter with a distinctive RED collar / ring on the outer plug. The legacy IntelliVue hose uses a 6-millimeter bore. While they appear similar to the eye, force-fitting a legacy 6mm hose (M1599B) into a 5mm X3/MMX red port will damage the internal socket O-rings or cause inflation pressure leaks under 300 mmHg static testing!
3. Efficia CM & SureSigns VM Series: Balanced Performance
The Efficia CM series (CM10, CM12, CM100, CM120, CM150) and SureSigns VM series (VM4, VM6, VM8, VS2, VS3) provide versatile, cost-effective vital signs monitoring for general wards and step-down units.
For adult and pediatric patients, these monitors utilize the standard quick-connect air hose M1599B. For infant and neonatal monitoring, clinicians must select dedicated neonatal air hoses equipped with female luer-slip safe-release connectors (MedLinket A30 connector) to match neonatal Hylink TPU disposable cuffs.
4. Entry-Level Models: Philips A1 & A3 Series
The Philips A1 (M3921A, M3922A, M3923A, M3924A) and Philips A3 (M3926A, M3927A, M3928A, M3929A) represent basic vital signs monitors widely deployed in general wards, outpatient clinics, and ambulatory care.
These monitors utilize dedicated quick-connect air hoses (OEM P/N: M3918A / 989803136931) with A06 connectors. Choosing the correct length (10ft or 12ft) ensures flexible bedside positioning without tubing drag.
5. Master Philips NIBP Hose Cross-Reference Table
| # | Philips Monitor Series & Models | Patient Size | Philips OEM P/N | MedLinket P/N | Monitor End | Cuff End Connector | Length & Cable Specs |
|---|---|---|---|---|---|---|---|
| 1 |
IntelliVue Series MP20/30/40/50/60/70/80/90, MX400/450/500/550/700/800 |
Adult / Pediatric | M1598B (5ft) M1599B (10ft) |
YA25A06-05 YA25A06-10 |
A25 Mono Plug (6mm) | A06 Metal Quick-Connect Bayonet | 5ft / 10ft, Single-tube grey TPU |
| 2 |
IntelliVue MMX / X3 & MX100 (ISO 80369-1 Red Port) |
Adult / Pediatric | 989803209771 | YA80A06-10 | A80 Red Collar Plug (5mm) | A06 Quick-Connect Bayonet | 10ft (3m), Single-tube TPU, 5mm bore |
| 3 |
IntelliVue MMX / X3 & MX100 (ISO 80369-1 Red Port) |
Infant / Neonate | 989803209741 989803209761 |
YA80A45-10 | A80 Red Collar Plug (5mm) | A45 New-Style Neonatal Safety Connector | 10ft (3m), Single-tube TPU, 5mm bore |
| 4 |
Efficia CM Series (CM10, CM12, CM100-150) SureSigns VM Series (VM4, VM6, VM8) |
Adult / Pediatric | M1598B M1599B |
YA25A06-05 YA25A06-10 |
A25 Mono Plug (6mm) | A06 Quick-Connect Bayonet | 5ft / 10ft, Single-tube TPU |
| 5 | Efficia CM & SureSigns VM | Infant / Neonate | M1596B M1597B |
YA25A30-10 | A25 Mono Plug (6mm) | A30 Female Luer Slip Safe-Release | 10ft (3m), Single-tube green TPU |
| 6 |
Philips A1 Series (M3921A–M3924A) Philips A3 Series (M3926A–M3929A) |
Adult / Pediatric | M3918A 989803136931 |
YA06A06-10 YA06A06-12 |
A06 Quick Plug | A06 Quick-Connect Bayonet | 10ft / 12ft, Single-tube TPU |
| 7 | Philips A1 & A3 Series | Infant / Neonate | 989803136941 | YA06A30-10 | A06 Quick Plug | A30 Female Luer Slip Safe-Release | 10ft (3m), Single-tube TPU |
6. Common Misuses & Safety Quick Guide
| # | Common Clinical Misuse | Potential Clinical Risk | Correct Standard Operating Procedure (SOP) |
|---|---|---|---|
| 1 | Leaving monitor in “Adult” mode for infants/neonates (inflation up to 300 mmHg) | Limb ischemia, severe pain, tissue injury in vulnerable neonates | Switch patient category to “Neonate/Infant” mode on monitor before cuff attachment (max inflation restricted to 150 mmHg) |
| 2 | Applying 6mm legacy hose (M1599B) into a 5mm MMX/X3 red ISO port | O-ring socket damage, air leakage under 300 mmHg static pressure | Verify monitor port: if outer ring is RED, use 989803209771 (YA80A06) hose |
| 3 | Cuff size does not match mid-arm circumference | Falsely high (small cuff = +10–15 mmHg) or falsely low readings | Select cuff size using MedLinket 3-Step Sizing Chart |
| 4 | Cuff applied too loose or too tight | Excessive tightness causes distal cyanosis; loose fit under-estimates BP | Wrap snugly — apply 1-finger rule (one finger beneath wrapped cuff) |
| 5 | Cuff tubing port pointing upward toward shoulder | Inaccurate oscillometric pulse wave detection | Tubing port MUST point downward toward hand; align “▲” marker over brachial artery |
| 6 | Cuff placed above or below heart level | Hydrostatic error skewing SBP/DBP ±8 mmHg per 10 cm height difference | Position cuff level with right atrium (4th intercostal space), arm supported at ~45° |
| 7 | IV infusion line or SpO2 sensor on same limb as NIBP cuff | Intermittent inflation blocks IV fluid flow and causes SpO2 alarm artifacts | Apply cuff to opposite limb whenever possible |
- Check 1 (Patient Category): Confirm monitor mode is set to Adult, Pediatric, or Neonate.
- Check 2 (Hose Bore): Verify whether monitor port requires 6mm (A25) or 5mm Red Ring (A80 ISO 80369-1).
- Check 3 (Tubing Integrity): Inspect TPU hose for kinks, cracks, or loose latch connectors.
Recommended Philips Compatible NIBP Accessories
Verified User Review
Sarah Thompson, Biomedical Technician, Seattle, WA
⭐⭐⭐⭐⭐
As a biomedical technician servicing neonatal units, I was thrilled to find MedLinket's Philips-compatible neonate NIBP hose (YA25A06-10). This hose is a perfect fit for our Philips monitors, saving us significant costs compared to OEM parts—nearly 70% less! The 10ft length is ideal for our busy NICU, and the quality is top-notch, meeting FDA and CE standards. We ordered during a peak period, and the expedited shipping got it to us in just 5 days, securely packaged. Installation was seamless, and it’s been performing flawlessly for weeks. Highly recommend MedLinket for reliable, cost-effective solutions!
7. Why Choose MedLinket for Philips Compatible NIBP Accessories
MedLinket has focused on medical sensor and cable manufacturing since 2004 (Stock Code: 833505). Operating a 10,000+ m² manufacturing footprint with 2,800+ sets of precision molds, MedLinket supplies 2,000+ hospital clients across 117+ countries.
Certified Regulatory Quality
ISO 13485:2016 (TÜV), MDSAP, NMPA (Registration No. 20243072401), FDA 510(k), and CE MDR certified. 100% factory pressure-leak tested under 300 mmHg static pressure.
Medical-Grade TPU Construction
All air hoses utilize durable, flexible medical TPU. Resistant to chemical hospital disinfectants, latex-free, DEHP-free, and kink-resistant.
Broad Compatibility Matrix
Supports 30+ monitor brands including Philips, GE Healthcare, Mindray, Draeger, Nihon Kohden, Spacelabs, Welch Allyn, Edan, Biolight, Comen, and more.
$5 Million USD Global Product Liability
Backed by $5M USD global product liability coverage underwritten by Liberty Insurance. Individual "Additional Insured" certificates available for distributors.
8. Frequently Asked Questions
How do I know if my Philips monitor needs a 6mm or 5mm red-ring NIBP hose?
Inspect the NIBP socket on your monitor or module front panel. Standard IntelliVue MP20-90 and MX400-800 series use 6mm socket ports (requires M1599B / YA25A06 hose). Newer compact modules like IntelliVue MMX, X3, and MX100 feature a socket port with a distinctive RED ring collar indicating 5mm ISO 80369-1 bore (requires 989803209771 / YA80A06 hose).
Are MedLinket NIBP hoses certified for hospital use in the US and Europe?
Yes. All MedLinket patient monitoring accessories are manufactured under ISO 13485:2016 quality systems and carry FDA 510(k) clearances, CE MDR certification, and MDSAP approval.
Can I connect MedLinket hoses directly to original Philips blood pressure cuffs?
Yes. MedLinket hose cuff-side connectors (A06 metal bayonet, A30 neonatal luer slip, A45 new neonatal safety connector) conform strictly to OEM physical dimensions, ensuring direct connection to original Philips reusable and disposable cuffs without pressure leakage.
Declaration & Legal Notice:
- This product is neither manufactured, authorized, nor endorsed by the original equipment manufacturer (OEM). Compatibility has been independently verified based on publicly available technical specifications and internal ISO 13485 test protocols.
- Actual product performance may vary by device model and software configuration. We recommend testing compatibility before clinical deployment. Contact customer service for a full list of confirmed compatible devices.
- All third-party company and brand names (Philips, IntelliVue, Efficia, SureSigns) mentioned on this page are for identification and compatibility mapping purposes only.
