Across a mixed Nihon Kohden fleet, select accessories from the exact monitor model and installed configuration. For SpO₂, confirm the connector and technology—14-pin Nihon Kohden native, 9-pin OxiMax, or legacy 7-pin OxiSmart. For ECG, verify 12-pin versus 6-pin and AHA versus IEC. For NIBP, verify the hose connector and the patient’s measured cuff size. Do not order from the family name alone.
This hub links MedLinket Nihon Kohden-compatible accessories, organized by parameter and scenario. For the full catalog, see the Nihon Kohden compatible accessories collection.
Nihon Kohden models covered
| Family | Models | Typical use |
|---|---|---|
| Life Scope (modular bedside) | BSM-2300 / 2400 series, CSM series, G3 / G5 / G7 / G9, L / N / J / VS | Adult ICU, OR, CCU |
| BSM (bedside) | BSM-1700 series, BSM-6301C / 6501C / 6701C, BSM-3562 / 3763 | Bedside, mid-range and advanced |
| PVM | PVM-2703, PVM-2701 | Compact bedside, sub-acute |
| SVM (specialized) | SVM-7130 / 7160 / 7503 / 7523 / 7601 / 7602 / 7603 / 7604 / 7621 / 7622 | Varied by configuration |
How to identify your Nihon Kohden SpO2 generation
Three ways to confirm:
- Look at the SpO2 connector on the monitor: 14-pin Nihon Kohden native is the original round 14-pin standard; 9-pin OxiMax (Nellcor-licensed) is a 9-pin connector present when the monitor was specified with Nellcor SpO2; 7-pin OxiSmart is the legacy round connector on older BSM and Life Scope units.
- Check the SpO2 sensor cable currently in use — the OEM part number on the label identifies the generation.
- Check the unit's purchase order or biomedical record — Nihon Kohden documents the SpO2 technology on the original quote.
SpO2 accessories by connector generation — the rule
- 14-pin native — the most common connector on Life Scope, BSM, PVM and SVM. MedLinket 14-pin compatible sensors cover reusable direct-connect and short-cable styles plus the full TL-series disposable range below.
- 9-pin OxiMax (Nellcor-licensed) — when Life Scope, BSM or SVM was specified with Nellcor SpO2, the OxiMax algorithm runs on the licensed Nellcor board. MedLinket OxiMax-compatible cables transmit the optical waveform and do not replicate Nellcor's signal processing — the DS-100A-style reusable adult finger clip and the Nellcor family serve these units.
- 7-pin OxiSmart legacy — older Life Scope and early BSM units shipped with the legacy 7-pin OxiSmart standard; confirm the connector per unit and request a configuration review for these.
- 14-pin to 9-pin adapter cables — for a mixed Nihon Kohden fleet that wants to use newer 9-pin sensors on older 14-pin monitors. Two distinct adapters exist — one routing OxiMax technology, one routing NK technology — they look similar but are not interchangeable.
Compatible accessories by family — direct links
Confirm each unit's SpO2 connector generation before ordering sensors (see above), the ECG trunk pin count (12-pin vs 6-pin) and color code (AHA vs IEC), and the NIBP cuff connector. For anything not listed, browse the full Nihon Kohden compatible accessories collection.
SpO2 sensors 14-pin native + OxiMax
All SpO2 sensors| OEM cross-reference | Patient / type | Host |
|---|---|---|
| P205A / TL-220T / P225G direct-connect | Reusable, direct-connect | NK 14-pin |
| TL-201T short sensor | Reusable, short cable | NK 14-pin |
| TL-271T adult | Disposable adhesive | NK |
| TL-272T pediatric | Disposable adhesive | NK |
| TL-273T neonate / adult | Disposable adhesive | NK |
| TL-274T infant | Disposable adhesive | NK |
| TL-253T | Disposable | NK |
| DS-100A compatible | Adult finger clip, reusable | 9-pin OxiMax |
| MAX-A compatible | Adult, disposable | 9-pin OxiMax |
SpO2 adapter / extension cables 14↔9-pin
All SpO2 cables| OEM cross-reference | Configuration |
|---|---|
| JL-900P compatible | NK SpO2 adapter cable |
| JL-650P compatible | NK SpO2 adapter cable |
| JL-302T compatible | NK SpO2 adapter cable |
ECG cables & leadwires 12-pin / 6-pin
All ECG| OEM cross-reference | Type |
|---|---|
| JC-906P trunk (3/6-lead, IEC) | ECG trunk cable |
| Neonatal 3-lead trunk (AHA/IEC) | Neonatal trunk cable |
| NK 3-lead, pinch/snap | 3-lead ECG cable |
| NK 3-lead, pinch/grabber | 3-lead ECG cable |
| NK 5-lead, pinch/snap | 5-lead ECG cable |
| NK 5-lead, pinch/grabber | 5-lead ECG cable |
| NK ECG analog output cable | Analog output |
| NK ECG analog output (5 m) | Analog output |
ECG electrodes universal
All electrodes| Product | Patient / type |
|---|---|
| Adult solid-gel, 4.0mm snap | Adult |
| Pediatric electrodes | Pediatric |
| Disposable ECG electrodes | General |
Electrodes are universal across Nihon Kohden and most other OEM platforms — buy by patient type and clinical scenario, not by monitor model. For selection logic see the ECG electrodes buyer's guide.
NIBP cuffs & hoses submin connector
All NIBP| Product | Size / type |
|---|---|
| Neonate (6–11 cm) | Reusable, submin connector |
| Infant (10–15 cm) | Reusable, submin connector |
| Pediatric (14–21.5 cm) | Reusable, submin connector |
| Small adult (20.5–28 cm) | Reusable, submin connector |
| Adult (27–35 cm) | Reusable, submin connector |
| Large adult (34–43 cm) | Reusable, submin connector |
| Adult thigh (42–54 cm) | Reusable, submin connector |
| BSM-6000 disposable adult (24–32 cm) | Disposable |
| BSM-6301K/6501K/6701K disposable small adult | Disposable |
| PVM-2701 disposable cuff | Disposable |
| YN-901P NIBP hose | Adult hose, submin |
| YN-701S NIBP hose | NIBP hose, submin |
| YN920P neonatal hose | Neonatal luer-slip hose |
Disposable neonate cuffs are available in sizes 1–5; browse the neonatal disposable cuffs collection for the full range.
IBP cables 12-pin NK
All IBP cables| OEM cross-reference | Transducer interface |
|---|---|
| JP-902P compatible | Edwards |
| NK IBP cable (Utah) | Utah |
| NK IBP cable (B. Braun) | B. Braun |
| NK IBP cable (Abbott) | Abbott |
| JP-900P compatible | BD |
Pair with single-use disposable IBP transducers by connector standard. See the Edwards IBP transducer cross-brand test.
Temperature probes YSI-400
All temperatureMany Nihon Kohden-compatible temperature configurations use YSI-400 thermistor probes. Confirm the monitor-end input, required adapter, thermistor standard, patient category, and measurement site for the exact unit before ordering.
| Product | Site / patient |
|---|---|
| YSI-400 adult skin (409B) | Adult, skin |
| YSI-400 adult eso/rectal | Adult, eso/rectal |
| YSI-400 pediatric skin | Pediatric, skin |
| YSI-400 pediatric eso/rectal | Pediatric, eso/rectal |
Confirm your thermistor standard with the YSI 400 vs YSI 700 compatibility test.
BIS anesthesia-depth & EEG
All anesthesia EEG| Product | Type |
|---|---|
| BISx anesthesia EEG adapter cable | BIS adapter cable |
| 186-0106 EEG sensor | Disposable non-invasive EEG sensor |
| 186-0107 adapter cable | Anesthesia EEG adapter cable |
BIS depth-of-anesthesia interpretation is performed by the BIS algorithm in the host module — MedLinket adapters and sensors transmit the EEG signal and do not replicate or modify BIS signal processing.
EtCO2 & water traps
All EtCO2Nihon Kohden monitors with the EtCO2 option module accept third-party mainstream and sidestream sensors, airway adapters, CO2 nasal cannulas and a waterlock with the appropriate NK-protocol adapter. Confirm the module protocol per unit and browse the EtCO2 collection.
Reading path by clinical scenario
Adult ICU on Life Scope / BSM-6701C (fixed bedside)
5-lead 12-pin ECG trunk plus adult solid-gel electrodes; 14-pin reusable adult finger-clip SpO2 (NK native) or 9-pin OxiMax if Nellcor-licensed; adult-standard reusable NIBP cuff plus dual-tube extension; 1–2 IBP channels with a 12-pin NK-to-Edwards or NK-to-Utah cable; NK skin temperature probe; BIS if the anesthesia-depth option is installed.
Cardiac surgery OR on Life Scope G7 / G9
10-lead diagnostic 12-pin ECG plus diagnostic leadwires plus radiolucent electrodes; 14-pin or 9-pin OxiMax reusable adult finger-clip SpO2; adult-large NIBP cuff; 3–4 IBP channels with closed blood sampling; dual-site temperature; mainstream EtCO2; BIS for anesthesia depth.
ED triage and step-down on BSM-1700 / PVM-2703 / BSM-3562
5-lead 12-pin or 6-pin ECG trunk (per model) plus adult solid-gel electrodes; reusable or disposable SpO2 by turnover; NIBP cuffs in 2–3 sizes per unit; optional temperature probe. IBP and EtCO2 are typically not on these models.
NICU on Life Scope with neonatal module
Neonatal DIN 3-lead trunk plus neonatal electrodes; a compatible neonatal wrap or adhesive SpO₂ sensor; neonatal NIBP sizes 1–5 with the correct hose; a compatible neonatal temperature probe; and IBP equipment when clinically indicated. Clinical reminder: inspect sensor sites frequently and reposition according to the sensor instructions and local protocol; reposition immediately if there is blanching, discoloration, swelling, pressure, moisture-related slippage, or signal degradation.
Transport on SVM-7000 series
Add the cable length and strain relief required for transport, then verify battery condition, runtime, and service status according to the manufacturer’s instructions and the biomedical maintenance program.
Common procurement pitfalls
- Regional catalog code mismatch. Related products may use different part-number prefixes, packaging references, or market documentation across regional catalogs. Confirm the exact SKU, connector, patient type, package quantity, and sourcing market; provide a label photograph when the code is unclear.
- Ordering a 14-pin sensor for a 9-pin unit, or vice versa. The Nihon Kohden portfolio spans both connector generations. Identify the connector before ordering.
- Confusing the 14-pin-to-9-pin OxiMax adapter with the 14-pin-to-9-pin NK adapter. They look mechanically similar but route different SpO2 technologies. Confirm the SpO2 technology of the source sensor before ordering the adapter.
- Mixing AHA and IEC ECG leadwire color codes. Standardize the color code by department.
- Ordering a 12-pin ECG trunk for a compact BSM that has a 6-pin port. Use a model-specific purchase order.
- Treating SVM-series accessories as identical across the family. The SVM models differ — write the exact model name on the purchase order, not "SVM-series accessories."
How to request a configuration review
For a Life Scope, BSM, PVM, SVM, or mixed Nihon Kohden fleet, provide the exact model list, connector photographs, current sensor and cable part numbers, installed option modules, ECG standard, NIBP hose and cuff requirements, patient categories, sourcing region, and intended use. The review should confirm each line item before a purchase order is released.
Frequently asked questions
How do I tell which SpO2 connector my Nihon Kohden monitor uses?
Check the connector on the monitor, the label and connector face on the current cable, and the unit’s biomedical or purchasing record. Common families include 14-pin Nihon Kohden native, 9-pin OxiMax, and legacy 7-pin OxiSmart. Confirm the exact unit because the same monitor family can have different installed configurations.
Why do the disposable sensor part numbers differ between catalogs?
Regional catalogs may use different part-number prefixes, packaging references, or market documentation for related Nihon Kohden-compatible products. Confirm the exact SKU, patient type, connector, package quantity, and market before ordering; a label photograph is useful when the code is unclear.
Can a 9-pin sensor be used with a 14-pin Nihon Kohden monitor?
Only when a product-specific adapter is verified for the exact monitor-side interface and the sensor-side SpO₂ technology. Similar-looking adapters may route different technologies and are not interchangeable. Confirm the monitor model, connector photographs, adapter cross-reference, and sensor family before use.
Do all Life Scope, BSM, PVM, and SVM monitors use the same accessories?
No. Accessory requirements can vary by exact model, production period, region, and installed option. Verify the SpO₂ connector and technology, ECG trunk pin count and color standard, NIBP connector and cuff size, temperature input, and any IBP, BIS, or EtCO₂ module before ordering.
What should I send for a Nihon Kohden compatibility check?
Send the exact monitor model, clear photographs of the monitor ports and connector faces, current accessory part numbers, installed option modules, patient category, desired cable length, ECG standard, NIBP cuff range, sourcing market, and intended clinical use.
Are these Nihon Kohden original accessories?
MedLinket-compatible accessories are independently manufactured alternatives. Nihon Kohden and other third-party names and part numbers are used only to identify the equipment, technology, or cross-reference being matched; they do not imply OEM manufacture, authorization, affiliation, or endorsement.
Compatibility and trademark notice. MedLinket-compatible accessories are independently manufactured and are not presented as Nihon Kohden, Nellcor, Covidien, Medtronic, BIS, Edwards, Utah, B. Braun, or other OEM original products. Third-party names and part numbers are used only to identify the equipment, technology, or cross-reference being matched. Confirm the exact monitor model, installed option, connector, patient category, cable configuration, regional documentation, and intended use before clinical deployment. Product registrations, certifications, specifications, packaging, and availability vary by SKU and market; request current documentation for the exact product. This page is intended for trained biomedical, clinical engineering, procurement, and healthcare personnel and does not replace the monitor or accessory instructions for use.
About MedLinket. MedLinket manufactures patient-monitoring accessories including SpO₂ sensors and adapter cables, ECG cables and leadwires, NIBP cuffs and hoses, IBP cables, temperature probes, anesthesia EEG accessories, and EtCO₂ products. Product registrations, certifications, specifications, availability, and verified compatibility vary by SKU, device configuration, and market; request current documentation for the exact product before purchase or clinical deployment.
